Keeping your AGO firmware up to date ensures you benefit from the latest features, improvements, and compatibility enhancements.
Stay notified about new firmware releases
Register your AGO product at www.vintagevisual.eu/support to be notified when new software is available.
Download the new firmware
- Go to the Downloads page
- Under "Firmware", download the English or Japanese file
- The file ends in .bin, for example firmware-v6.5.5-en.bin. Use it as it is, there is nothing to unzip
- Download the file before you connect to AGO's WiFi. While your device is on AGO's network it has no internet
Enable WiFi on your AGO
- On your AGO, go to Settings → Firmware Update
- Enable WiFi Web Server
Need help connecting? See the full WiFi connection guide: AGO WiFi Connection Troubleshooting
Connect your device
- From your computer or mobile device, connect to the AGO WiFi network (network name: AGO, password: 12345678)
- Your device may say the network has no internet. That is normal, stay connected
- Open a browser and type the IP address shown on your AGO screen (usually 10.10.10.1)
Update the firmware
- Press the Update tab
- Select Choose File
- Select the firmware file you downloaded in Step 1
- Press Update to begin
- Wait for the process to complete. AGO will restart automatically and apply the update
Verify the update
After the restart, go to Settings → Software version to confirm the new firmware has installed successfully.
Video Guides
Video 1: Updating AGO from v6.4
Video 2: Updating AGO from v6.5
Your AGO Film Processor is now running the latest firmware. Check our support page regularly for new releases and resources.